Ppg244_s02_082.jpg Apr 2026

: You select a line (usually on the edge where the mold halves meet) that determines w

To draft a solid feature for a specific part or drawing (like ppg244_s02_082.jpg ), you typically use the tool found in the features toolbar of most CAD software such as SolidWorks or Solid Edge . This feature adds an angle to selected faces of a model, which is essential for parts intended for injection molding or casting to ensure they can be removed from the mold. Standard Workflow for Creating a Draft Feature ppg244_s02_082.jpg

: For circular or path-based features, you can often build the draft directly into the cross-section profile before revolving or sweeping the part. : You select a line (usually on the

: Create two different sketches at different heights (one slightly offset or scaled) and use a Loft to connect them, naturally creating a tapered wall. : Create two different sketches at different heights

: Choose the specific faces you want to taper. Use the Detailed Preview option if available to visualize the direction of the draft. Confirm : Click OK to apply the solid feature to your model. Troubleshooting Complex Geometry

: You select a plane or face that remains stationary, and the draft is applied relative to it.

: Locate the Draft icon in your Features toolbar or navigate through the menu (e.g., Insert > Features > Draft in SolidWorks). Define the Type of Draft :