9010 Instruktsiia — Tomagavk Tw

Press and hold on the new remote simultaneously until a chirp confirms pairing. Repeat for up to 4 remotes. Turn Ignition OFF to exit. ⚠️ Important Safety & Installation Notes Installation Tip Antenna Place high on the windshield, away from metal. Valet Button Hide it, but keep it accessible for emergencies. Shock Sensor Mount firmly to a metal part of the car body. Temperature Sensor Attach to the engine block for accurate remote start data. 📉 Troubleshooting Table Potential Cause Short Range Low remote battery or antenna interference. Replace CR2032 battery; move antenna. No Remote Start Hood is open or handbrake is not engaged. Close hood; check handbrake wire. False Alarms Shock sensor is too sensitive. Adjust the dial on the sensor unit.

The engine will continue running for 1, 3, or 6 minutes after the key is removed. ⚙️ Programming New Remotes If you need to pair a new key fob: Turn the .

Press Buttons 1 and 2 simultaneously. The system arms without siren confirmation. Remote Engine Start tomagavk tw 9010 instruktsiia

Designed for turbocharged engines to let the turbine cool down.

Press Button 1 and hold (or press twice quickly depending on settings). Press and hold on the new remote simultaneously

I can also look up the specific (AF settings) if you need to change the behavior of the locks or lights.

Press and hold the until 4 siren chirps are heard. Temperature Sensor Attach to the engine block for

The engine will run for the programmed time (default 10–15 mins). Press Button 1 again for 2 seconds. Turbo Timer