T20.base.hdxp2p.gen.en.201808131.ipc.tgz Today

: You will need a MicroSD card (FAT32 formatted) or the CMS/VMS software on a PC.

If the firmware resets your settings, the default login info for these boards is typically: : 192.168.1.10 or 192.168.1.18 Username : admin Password : (Leave blank) T20.base.HDXP2P.gen.en.201808131.IPC.tgz

: Connect your PC to the same network as the camera and search for the device IP. Upload Firmware : Navigate to Device Config > System > Upgrade . Select the extracted .bin file from your computer. Click Start and wait for the progress bar to reach 100%. Default Credentials (Post-Update) : You will need a MicroSD card (FAT32

The camera will usually play a series of tones or blink its status LED. Wait for the process to complete. T20.base.HDXP2P.gen.en.201808131.IPC.tgz